Honda city manual torrent safewatch quickconnect plus user manual evinrude 50 maintenance manual adt lynx quick connect manual - pdfslibforyou.com. Safewatch QuickConnect Plus Control Defaults.23 Safewatch QuickConnect Plus Summary of Connections Diagram.24 Refer to the Safewatch QuickConnect Plus Installation and Setup Guide P/N 800-03857-4 or later for detailed information on programming the system. Press of the AUX key plus user code. The AUX key in your ADT Safewatch. The ADT Safewatch QuickConnect Security System supports voice dialog between an.
• Safewatch QuickConnect Plus Security System User Guide ARMED READY STAY ESCAPE RECORD VOLUME PLAY DELETE AWAY TEST BYPASS SELECT CODE CHIME STATUS FUNCTION 800-03858-4 11/09 Rev. A Ref: LYNX PLUS.
45 LIMITEDWARRANTY...47 Your ADT security system is designed for use with devices manufactured or approved by ADT for use with your security system. Your ADT security system is not designed for use with any device that may be attached to your security system's keypad or other communicating bus if ADT has not approved such device for use with your security system. • AUX key plus user code. Ask your installer which of these features has been assigned to the AUX key in your ADT Safewatch QuickConnect Plus Security System. Refer Security System to the Aux Function section for detailed information. • Many false alarms are caused by simple accidents, like forgetting to close a door when you leave. The ADT Safewatch QuickConnect Plus is equipped with several features that help prevent false alarms.
Some of these features are optional or programmable. Case Cx80 Operators Manual. Although turning off some of these features may provide additional security, it may also increase the chances of false alarms. • 02, and so on. These numbers appear on the display when an alarm or trouble condition occurs.
ADT Safewatch QuickConnect Plus Security System is not intended for UL985 U U U U L L L L Household Fire applications unless a 24-hour backup battery (P/N LYNXRCHKIT-HC) is installed. • System section for information about clearing the memory of alarm display.
Two-Way Voice Feature The ADT Safewatch QuickConnect Plus Security System supports voice dialog between an operator at the central station and an individual at the premises. This feature allows the central station to listen.
• QUICK VIEW OF SYSTEM FUNCTIONS NOTE: = Boxes represent the entering of your 4-digit user code. SECURITY FUNCTIONS Checking system status: --------------- STATUS * + STAY To arm in STAY mode: ----------------- (only if programmed and * + STAY OR STAY To restart exit delay: -------------------- system armed in Stay mode) * + AWAY. • QUICK VIEW OF SYSTEM FUNCTIONS REMOTE PHONE CONTROL OPERATION To remotely disarm: --------------------- +  To remotely arm in AWAY mode: -- +  To remotely arm in STAY mode: --- +  To remotely bypass a zone: ----------- +  + zone no. To remotely activate forced bypass: ------------ +  + [#]* To remotely check system status:. • SYSTEM OVERVIEW About the Master Keypad General IMPORTANT! If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location.
• SYSTEM OVERVIEW Master Keypad Definitions ARMED READY STAY DELETE ESCAPE RECORD VOLUME PLAY AWAY TEST BYPASS SELECT CODE CHIME STATUS FUNCTION 1000-200-013-V0 IMPORTANT! When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another.
If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning. • SYSTEM OVERVIEW Master Keypad Definitions STAY / DELETE KEY: Arms the perimeter 12. STATUS KEY: When pressed prior to arming, burglary protection, guarding protected doors, the keypad will display all open zones, and will windows and other perimeter protection points, announce system status.